- Open Access
From microarray to biology: an integrated experimental, statistical and in silico analysis of how the extracellular matrix modulates the phenotype of cancer cells
BMC Bioinformatics volume 9, Article number: S4 (2008)
A statistically robust and biologically-based approach for analysis of microarray data is described that integrates independent biological knowledge and data with a global F-test for finding genes of interest that minimizes the need for replicates when used for hypothesis generation. First, each microarray is normalized to its noise level around zero. The microarray dataset is then globally adjusted by robust linear regression. Second, genes of interest that capture significant responses to experimental conditions are selected by finding those that express significantly higher variance than those expressing only technical variability. Clustering expression data and identifying expression-independent properties of genes of interest including upstream transcriptional regulatory elements (TREs), ontologies and networks or pathways organizes the data into a biologically meaningful system. We demonstrate that when the number of genes of interest is inconveniently large, identifying a subset of "beacon genes" representing the largest changes will identify pathways or networks altered by biological manipulation. The entire dataset is then used to complete the picture outlined by the "beacon genes." This allow construction of a structured model of a system that can generate biologically testable hypotheses. We illustrate this approach by comparing cells cultured on plastic or an extracellular matrix which organizes a dataset of over 2,000 genes of interest from a genome wide scan of transcription. The resulting model was confirmed by comparing the predicted pattern of TREs with experimental determination of active transcription factors.
Microarrays are widely used to overview gene expression landscapes under different experimental conditions. Since their initial appearance microarrays developed into very dependable tools with good inter- and intra-platform reproducibility [1, 2]. Although numerous attempts to unify microarray analysis workflow were made, each manufacturer has its own methods for processing large quantities of data, and there is no general consensus as to the best means to analyze microarray data, and probably never will be. Each experimental situation is different, and different designs may be necessary for hypothesis testing as compared to hypothesis generation. With the former, one biological system is compared with another, and the significance of differences is statistically tested using a t-test, generally with the assumption that each biological sample is homogeneous. In such experiments statistical power becomes the driving consideration. In hypotheses generating experiments, a number of biological situations are compared, for example a series of different cell lines, a time course study or a dose-response study. The biological samples may not be homogeneous. Cost becomes a major consideration because the number of replicates needed to test hypotheses may make experiments prohibitive. Thus, there is a need for analytical approaches to use under hypothesis-generating conditions that are based on sound statistical principles but which nonetheless reduce the number of replicates needed to assemble at least a preliminary global picture of the effect of a particular biological situation on gene expression .
We present here a statistically robust approach for analyzing the changes in the transcriptome that is driven by the underlying biology. Previous work by I. Dozmorov showed that approaches based on separating variability in expression of genes into biological and technical sources provide an alternative means of identifying "genes of interest" for further analysis [4–7]. Under the assumption that in any experiment most genes do not change expression, the F-test is used to identify genes that express more variability than the overall technical variability of the system. This set of genes is referred to as "hypervariable genes," and has been assumed to reflect the relevant biological variables in the system. In this communication we have added a number of in silico tests based upon properties of these genes that do not depend upon expression. These additional analyses confirmed that at the level of transcriptional regulatory networks this approach does identify important genes that can then be assembled into networks of functions, transcriptional regulation and with previous knowledge. This represents a further extension of work published in our laboratory that included only in silico analyses [8, 9].
We applied this method to examining the effect of cancer remodeled extracellular matrix (crECM) on bladder papilloma-derived cell line (RT4) as they grow over the course of several days on a crECM after having been transferred from culture on plastic . Papillomas represent a very early premalignant change, and determining how a crECM can drive them toward malignancy could identify novel targets for therapy. Genes exhibiting major changes in expression introduced by crECM were selected and their functions examined. Two overlapping canonical pathways were identified as the main targets. Finally, transcription factors regulating the genes of interest were found and their validity proven by additional experimental method. Such integrative approach may reveal new roles of unknown genes , new drug targets , and lead to clinical tests .
The workflow chart of our approach is shown in Figure 1. The normalization process is presented because it is different from most approaches using normalization to the mean, median, or housekeeping genes. The frequency histogram of the un-normalized expression values yielded a bimodal, right-skewed curve as shown on Figure 2A. The distribution around the peak near zero was fitted to a Gaussian curve, providing a measure of the variability around zero that can be used to identify genes expressed significantly above zero. The zero point itself is slightly above zero because of non-specific binding. Interestingly, the array contained completely blank spots, which show up as a sharp peak exactly around zero, as well as a large number of spots of the solvent (3× SSC) the long oligo clones are contained in. The average of those points corresponds almost exactly to the zero point established from the entire array by the method above. The standard deviation of this peak is used to normalize all the expression data. Normalizing expression to the uncertainty in zero allows for a ready determination for the threshold of non-zero expression. Thus, expression value of "3" corresponds to 3 standard deviations (SD) above the zero point and corresponds to the valley in the total distribution. With this value, the p-value of a false positive assignment of expression vs. non-expression is < 0.001. With a threshold of 5 SD, the p-value for a false positive is p < 2.87 × 10-7. The arrays were then Log10 transformed and globally adjusted to each other by robust linear regression, which assumes that the expression of most genes is not altered in the experiment and down-weights the effect on global expression of those that do change. Box plots (Figure 2B) graphically show this adjustment. Full sets of raw and transformed data are available on Gene Expression Omnibus (GEO, http://www.ncbi.nlm.nih.gov/geo/), accession number GSE9291.
Gene expression dynamics
Genes expressed 5 SD above background were considered highly significantly expressed. While this choice is arbitrary, 5 SD above background was selected to focus on highly expressed genes and to minimize false positives by eliminating the noisy low-expressed genes. Of the 21,308 unique probes represented on the array, a total of 15,287 were expressed at 5 SD above background on the two arrays from cells grown on plastic and on the nine arrays from cells grown on crECM. The next step is to identify genes whose expression level responds to crECM. The total variance in expression of any gene is the sum of the technical variance (variance due to the measurement itself), Vt, the relevant biology, Vr, and the irrelevant biology Vi. Vi may be attributed to deviations in preparation of biological samples or other biological factors not related to the biology of interest. Genes that do not respond to the biological variables will express only technical variability and can effectively serve as "housekeeping genes" or a reference set against which genes that do respond can be identified with an F-test. Genes responsive to the biology generally show high variability that likely is systematic across the experiment. The overall mean technical variability was determined from the mode of the frequency distribution histogram of standard deviation of the data set (Figure 3A) and was 8.41% with a standard deviation of 6.75%. Thus, genes with relative standard deviations exceeding 3 SD above the mean (28.56%) were defined as hypervariable. A total of 3462 hypervariable (HV) genes were identified. However, the lack of replicates leads to an excessive sensitivity to single outliers. A second screening by a leave-one-out method  minimized false positives due to a single data point. A total of 2743 HV genes were judged to be hypervariable (p < 6.7 × 10-5) and, presumably, represent all the genes that respond to the presence of a crECM. This approach has proven reliable in identifying a set of genes of interest with minimal need for replicates as compared to methods based on t-tests [4, 9].
Visualization of gene expression changes
For easy visualization of up- and downregulated genes their expression values were antilog-transformed and normalized around zero with standard deviation equal to 1. They were organized into 3 clusters by K-means clustering with 1000 runs and a similarity metric as correlation (uncentered). Increasing number of clusters yielded similar clusters differing only in amplitude, while using 2 clusters failed to distinguish the obvious dynamics. The results were visualized with Java TreeView program http://jtreeview.sourceforge.net/[14, 15] (data not shown). The clustering of hypervariable genes demonstrated that the vast majority of the biological variability was between cells grown on plastic and on the crECM, and with the main pattern being a change in state of expression, i.e. from off to on or vice versa. After the first 12 hours on the crECM, little variability in gene expression was observed. This indicates the changes of gene expression level occurred within the first 12 hours in cells grown on crECM, which in turn drives phenotypic changes (Figure 4). That later time points are not different from the earlier ones indicates no new biological processes such as cell death were introduced over the time course of the experiment.
This represents a very large set of genes of interest, and other than determining ontologies, such a large number is inconvenient to interpret. We therefore focused on the genes showing the largest changes, considering they could serve as "beacons" to draw our attention to the changes in underlying processes. Because the dynamics of gene expression exhibit mainly a change in state between cells growing on plastic vs. crECM, the set of hypervariable genes was filtered to identify the genes that are expressed below noise level on plastic and highly expressed on crECM ("off-on" genes) and vice versa ("on-off" genes) (Figure 4A). The two arrays of gene expression on plastic and nine arrays of timecourse on crECM were each averaged and genes with average expression level on plastic < 0 and on crECM > 1 (Log10 scale, average identifies geometric mean) were selected as "off-on" genes. The opposite criteria were applied to identify "on-off" genes. Using these stringent criteria, a total of 877 unique "off-on" genes were turned on by the crECM, whereas a total of 74 unique "on-off" genes were shut down by the crECM. The validity of this approach was tested in the next section.
Beside the main dynamic of state change genes a smaller number of genes showed change in level. Figure 3B shows the distribution of the ratio of expression of genes from cells grown on plastic to those grown on crECM. The standard deviation of this ratio is 0.2, and 3 standard deviations (0.6) corresponds to a 3-fold difference. A total of 241 genes were identified that were expressed at least 5 SD above background in cells grown on plastic and showed at least a 3-fold increase in expression. Only 67 genes showed the opposite pattern being highly expressed on plastic and decreasing 3-fold but still expressed above noise.
Gene ontology analysis and visualization
The ontologies of the genes of interest were examined using the Database for Annotation, Visualization and Integrated Discovery (DAVID, http://david.abcc.ncifcrf.gov/)  tool, which examines all the functions represented by each gene in a gene list and identifies groups that share ontologies. The over-represented ontologies form the basis for identifying functional processes represented in the change of state induced by a crECM. Several parameters can be adjusted to achieve a reasonable and comprehensive set of ontologies and associated genes. For the 877 "off-on" genes the following parameters were set: Similarity term overlap: 5; Similarity threshold: 0.5; Initial group membership: 5; Final group membership: 5; Multiple linkage threshold: 0.5, which is equal to the "Highest" stringency setting in DAVID. After examining the results provided by different stringencies, the above set was selected because the picture presented overall affinities without too many groups but provided sufficient detail to build a conceptual model of the effect of crECM on progressing urothelial cells.
Out of the 877 "off-on" genes 190 clustered into 12 clusters of ontologies at highest stringency and 86 did not have recognized ontologies. These 86 unannotated genes likely represent either novel processes not currently identified or genes whose participation in known processes has not yet been discovered . The remaining 601 were predominantly distributed among "related genes" that shared some ontological features with one or more of the 12 clusters but did not rise above the threshold of significance. Some were entirely irrelevant and showed no similarity to any of the clusters. This step is illustrated in Table 1 along with significantly over-represented TREs shared by all members of each cluster.
Examination of 241 level-change genes increased on crECM by medium stringency ontological analysis of these genes found five clusters of functions, three of which were similar to those for state change.
The 74 genes that were shut off and the 64 genes that were 3-fold down-regulated on crECM were less informative than were those that were turned on or up-regulated. At same stringency as was used for "off-on" genes, one over-represented cluster was identified in the genes that were shut off and consisted of 6 transcription factors sharing homeobox ontology. Decreasing the stringency to "medium" (the default for DAVID) increased the number of genes in the cluster to 10 but did not add clusters. Genes that were down-regulated at least 3-fold yielded two clusters under medium stringency.
The validity of the selection of "beacon genes" was tested by comparing the ontological clusters observed with the entire set of 2743 HV genes. A total of 17 clusters was seen, all of which were identified using the "beacon" genes. This demonstrates that the smaller data set of state- and level-change genes will identify all the processes seen in the larger set of HV genes.
Having preliminary understanding of functions represented by state change genes, they were probed for membership in canonical pathways by Ingenuity© Pathway Analysis (IPA, http://www.ingenuity.com/). IPA maps each gene identifier to its corresponding gene object in the Ingenuity© Pathways Knowledge Base, and generates multiple biological networks with associated ontologies from a list of focus genes, as well as general gene ontologies overrepresented. IPA canonical pathways analysis identified the most significant known biological pathways for a given set of genes. For identification of a significant canonical pathway or pre-defined network of genes it is only necessary to identify a single member as significant, hence the term "beacon" genes. The participation of other members of the network is checked manually against the entire data set to ensure they are expressed, or show a smaller change than the "beacon" genes threshold . Pathways or connections involving genes that are not expressed are deleted. This process is particularly helpful in cases where a large number of genes of interest has been discovered. The smaller, more tractable set of "beacon" genes are used to draw attention to processes, and all the details are filled in with the entire data set as is shown below.
Of the 877 "off-on" genes 165 failed to map and represent unannotated genes about which little or nothing is known. The difference in annotation with the DAVID is due to IPA being curated. Of the 86 not annotated by DAVID 74 also were not annotated by IPA. Of the 714 mapped genes, 151 fit into various cell signaling processes and 133 were involved with cellular growth and proliferation. More informative were interconnected canonical pathways, many of which overlap. Any one gene may exhibit multiple functions and participate in multiple pathways. The most significant canonical pathways identified were the interconnected G-protein and NF-κB signaling networks (22 "beacon" genes combined). An NF-κB network is shown in Figure 5 with the gene expression dynamics indicated with a color code. When compared back against the set of HV genes and expressed genes, every member of the network was expressed, and many were found in the set of HV genes, which meant they showed smaller changes than the "beacons."
Identification of potential transcriptional networks
Genes sharing similar ontologies may be regulated by one or more common transcription factors. "Off-on" genes clustered by DAVID were tested for the presence of common transcription regulatory elements (TREs) upstream of the transcribed genes in each ontological cluster by the web-based program Promoter Analysis and Interaction Network Toolset, v.3.5 (PAINT, http://www.dbi.tju.edu/dbi/tools/paint/) . PAINT queries the Transfac™ database and calculates the probability that the TREs identified in a given list of genes differ from TREs in a random sample of genes. In this case, the basis of partitioning into ontological clusters being driven by particular transcription factors was tested by comparing the TREs found in each cluster against the entire list of 21 K genes present in the microarray. This provided a map of TREs significantly overrepresented in a given cluster against a significance threshold of p < 0.05. For more reliable results filtering with a false discovery rate (FDR) < 0.3 criterion was used, when specified. An example identifying the significantly overrepresented TREs in cluster 1 is shown in Figure 6A. The over-represented TREs are also summarized in Table 1 by cluster. The probability of a random collection of genes sharing a common TRE is less than 0.05. Thus the finding that a set of genes contains common TREs or fit into known networks supports that they are neither randomly selected by chance, nor the product of technical error to within the limits of statistical testing.
The predictions of PAINT were tested using an independent experimental assay that measured the DNA binding activity of transcription factors using TranSignal Protein/DNA Combo Arrays. This array allows estimation of binding activity of 345 TFs. We found a number of up-regulated transcription factors on crECM. The bar diagram in Figure 6B compares the activity of selected transcription factors in cells grown on plastic vs. crECM. The majority of transcription factors that showed large changes in activity were also identified by PAINT as driving up- or down-regulated clusters of genes, the results are shown in Table 1 with TREs confirmed by Panomics array highlighted in bold. Depending on stringency, between 5 and 13 transcription factors were shut off and between 25 and 40 were activated by the crECM. Supplemental table S1 in Additional file 1 shows DNA binding activity of all transcription factors in cells grown on plastic or crECM. Most of the changes were "off-on," as was observed for the mRNAs of the downstream genes. Some transcription factors were active in cells growing under both conditions.
In this study we present a self-guided approach for analyzing a complex biological change by microarrays and illustrate its use to describe the complex change in gene expression that occur when papilloma cells are placed on a crECM. The flowchart of each step of this approach is shown in Figure 1. We also confirm the validity of the integrated approach by independent verification of the predictions of transcriptional regulatory networks. With a very complex biological system mobility more than 2000 genes identified as significantly varying, we show that the essential elements of the change in the large scale picture of the biology can be captured in a smaller subset of "beacon" genes. Analysis of this more concise set of "beacons" facilitates mapping the gene expression dynamics onto known processes . We wish to emphasize that the resulting biological picture does not derive solely from indentifying only a few key genes. This approach also requires that all members of a pathway be expressed, which is determined by comparing putative networks or canonical pathways against the entire dataset of expressed genes. Genes showing smaller changes than shown by the "beacons" are identified against the set of HV genes.
The approach also is statistically robust. Expression is judged against the uncertainty of the zero point, and the threshold can be selected either to minimize false negatives or false positives. The need for replicates, and therefore the cost of experiments, is minimized using a global F-test against the variance of the system as a whole with a p-value standard of 1/N that minimizes false positive identification of significant genes. The HV gene approach is best suited to providing an overall description for hypothesis generation with multiple biological variables as opposed to hypothesis-testing in a two-state system (e.g. treated and control).
In summary, this article demonstrates an approach to microarray analysis that organizes the findings into a biologically based model that should in turn, facilitate generation and testing of hypotheses because the analysis itself is structured around the properties of biological system. In this case, the findings suggest that G-protein signaling plays a major role in the modulation of phenotype by crECM, that the cells are differentiated and acquire specialized functions (e.g. immune function and transmembrane proteins) and that several transcription factors regulate the process.
The RT4 bladder transitional cell papilloma cell line (American Type Culture Collection, Manassas Virginia) was cultured on plastic and on cancer-remodeled ECM, Matrigel™ (crECM), and RNA was isolated as described previously using the RNAeasy kit (QIAGEN Inc., Valencia, CA) [8, 19].
Microarray data were obtained using a spotted array from cells cultured on plastic (two arrays) and across 9 days time course of growth on crECM, as previously described . Cy3 labeled cDNA was synthesized and hybridized onto glass arrays spotted with 22,464 long oligos (~70 mers) from the UniGene database of functionally known genes.
Expression data were normalized to the variability around the zero point, as described previously [5, 7]. Genes were considered to be expressed if their expression normalized to the S.D. of zero point exceeded 3.0 (p < 0.001). The arrays were then globally adjusted to each other by robust linear regression. Genes expressing higher variability than the technical variability of the system (hypervariable, or HV genes) were identified as described previously  and as shown in Figure 3B. Two thresholds were used. HV genes showed relative standard deviations > 3.8 SD above that of the population mode (p < 6 .7 × 10-5). This value is 1/N, where N is the number of expressed genes (~15,000). A more stringent criterion of > 5 SD (p < 2.87 × 10-7) was also used to identify a subset of very HV, or "beacon" genes. Their expression profiles were clustered by the Cluster 3.0 program http://bonsai.ims.u-tokyo.ac.jp/~mdehoon/software/cluster/software.htm. Hierarchical clustering identified major patterns of gene expression changes; further clustering of selected "beacon" genes was done using K-means clustering, k = 3, which was selected as described below. Significantly over-represented gene ontologies were identified using the Database for Annotation, Visualization and Integrated Discovery (DAVID, http://david.abcc.ncifcrf.gov/) . Biologically relevant networks were assembled from identified clusters and groups of common genes by using Ingenuity Pathways Analysis (IPA, http://www.ingenuity.com/). Each gene identifier was mapped to its corresponding gene object in the Ingenuity Pathways Knowledge Base. Genes were not weighted by expression levels, and biological networks were built on this assumption. Analysis of common TREs shared by genes in each ontological cluster was performed by using the web-based program PAINT http://www.dbi.tju.edu/dbi/tools/paint/ against whole list of genes in microarray.
Additional assessment of the DNA binding activity of transcription factors using TranSignal Protein/DNA Combo Arrays (spin column version, # MA1215, Panomics, Redwood City, CA) was conducted according to the manufacturer's protocol. Briefly, cell nuclear extracts were incubated with biotin-labeled oligonucleotides that possess consensus DNA binding sites for 345 transcription factors. The protein bound probes were isolated by using a spin column and then hybridized to the DNA/protein array. After the DNA/protein array was washed, the array was incubated with detection solution and images of the chemiluminescent signal were captured using an Alpha Imager (Alpha Innotech, San Leandro, CA) and quantitated by using AlphaEase software and standardized against biotinylated DNA spots on the membrane. The results are linear between 0 and 100 units. In order to detect low expression transcription factor activity, two exposure times were used, 8 and 25 min. Values were adjusted for exposure so that all values were measured within the linear range of the assay. A histogram of expression data was plotted and was found to be bimodal, with one mode centered about zero. Background subtraction was performed by calculating the standard deviation of this distribution and subtracting 3 standard deviations above the mode from all expression values, approximately 6 units.
complementary deoxyribonucleic acid
cancer-remodeled extracellular matrix
Database for Annotation, Visualization and Integrated Discovery
false discovery rate
messenger ribonucleic acid
Promoter Analysis and Interaction Network Toolset
transcription regulatory element
Klebanov L, Yakovlev A: How high is the level of technical noise in microarray data? Biol Direct 2007, 2: 9.
Shi L, Reid LH, Jones WD, Shippy R, Warrington JA, Baker SC, Collins PJ, de LF, Kawasaki ES, Lee KY, et al.: The MicroArray Quality Control (MAQC) project shows inter- and intraplatform reproducibility of gene expression measurements. Nat Biotechnol 2006, 24: 1151–1161.
Huang S: Gene expression profiling, genetic networks, and cellular states: an integrating concept for tumorigenesis and drug discovery. J Mol Med 1999, 77: 469–480.
Dozmorov I, Centola M: An associative analysis of gene expression array data. Bioinformatics 2003, 19: 204–211.
Dozmorov I, Knowlton N, Tang Y, Shields A, Pathipvanich P, Jarvis JN, Centola M: Hypervariable genes–experimental error or hidden dynamics. Nucleic Acids Res 2004, 32: e147.
Dozmorov I, Knowlton N, Tang Y, Centola M: Statistical monitoring of weak spots for improvement of normalization and ratio estimates in microarrays. BMC Bioinformatics 2004, 5: 53.
Knowlton N, Dozmorov IM, Centola M: Microarray Data Analysis Toolbox (MDAT): for normalization, adjustment and analysis of gene expression data. Bioinformatics 2004, 20: 3687–3690.
Dozmorov MG, Kyker KD, Saban R, Knowlton N, Dozmorov IM, Centola M, Hurst RE: Analysis of the Interaction of Extracellular Matrix and Phenotype of Bladder Cancer Cells. BMC Cancer 2006, 6: 12.
Dozmorov MG, Kyker KD, Saban R, Shankar N, Baghdayan AS, Centola M, Hurst RE: Systems biology approach for mapping the response of human urothelial cells to infection by Enterococcus faecalis. BMC Bioinformatics 2007, 8: 52.
Hurst RE, Kyker KD, Bonner RB, Bowditch RG, Hemstreet GP: Matrix-Dependent Plasticity of the Malignant Phenotype of Bladder Cancer Cells. Anticancer Res 2003, 23: 3119–3128.
Smith BA, Kennedy WJ, Harnden P, Selby PJ, Trejdosiewicz LK, Southgate J: Identification of genes involved in human urothelial cell-matrix interactions: implications for the progression pathways of malignant urothelium. Cancer Res 2001, 61: 1678–1685.
Fournier MV, Martin KJ, Kenny PA, Xhaja K, Bosch I, Yaswen P, Bissell MJ: Gene expression signature in organized and growth-arrested mammary acini predicts good outcome in breast cancer. Cancer Res 2006, 66: 7095–7102.
Simon R: Development and evaluation of therapeutically relevant predictive classifiers using gene expression profiling. J Natl Cancer Inst 2006, 98: 1169–1171.
Saldanha AJ: Java Treeview–extensible visualization of microarray data. Bioinformatics 2004, 20: 3246–3248.
Juan HF, Huang HC: Bioinformatics: microarray data clustering and functional classification. Methods Mol Biol 2007, 382: 405–416.
Dennis G Jr, Sherman BT, Hosack DA, Yang J, Gao W, Lane HC, Lempicki RA: DAVID: Database for Annotation, Visualization, and Integrated Discovery. Genome Biol 2003,4(5):P3.
Vadigepalli R, Chakravarthula p, Zak DE, Schwaber JS, Gonye GE: PAINT: A Promoter Analysis and Interaction Network Generation Tool for Gene Regulatory Network Identification. OMICS: A Journal of Integrative Biology 2003, 7: 235–252.
Boutros PC, Okey AB: Unsupervised pattern recognition: an introduction to the whys and wherefores of clustering microarray data. Brief Bioinform 2005, 6: 331–343.
Kyker KD, Culkin DJ, Hurst RE: A model for 3-dimensional growth of bladder cancers to study mechanisms of phenotypic expression. Urologic Oncology 2003, 21: 255–261.
Eisen MB, Spellman PT, Brown PO, Botstein D: Cluster analysis and display of genome-wide expression patterns. Proc Natl Acad Sci USA 1998, 95: 14863–14868.
The authors gratefully acknowledge the technical assistance of Jean Coffman. This work was supported in part by a grant from the NIH to REH, R01 DK069808
This article has been published as part of BMC Bioinformatics Volume 9 Supplement 9, 2008: Proceedings of the Fifth Annual MCBIOS Conference. Systems Biology: Bridging the Omics. The full contents of the supplement are available online at http://www.biomedcentral.com/1471-2105/9?issue=S9
The authors declare that they have no competing interests.
Electronic supplementary material
Additional file 1: Supplemental Table S1. Activity of 345 transcription factors in cells grown on Matrigel and on Plastic. Values were obtained as described in Methods and are arbitrary units, but are normalized to protein content and exposure time against an assay standard of biotinylated DNA. (DOC 278 KB)
About this article
Cite this article
Dozmorov, M.G., Kyker, K.D., Hauser, P.J. et al. From microarray to biology: an integrated experimental, statistical and in silico analysis of how the extracellular matrix modulates the phenotype of cancer cells. BMC Bioinformatics 9, S4 (2008) doi:10.1186/1471-2105-9-S9-S4
- Standard Deviation
- Canonical Pathway
- Transcriptional Regulatory Network
- Technical Variability
- Gene Expression Dynamic