Discovering functional gene expression patterns in the metabolic network of Escherichia coli with wavelets transforms

Background Microarray technology produces gene expression data on a genomic scale for an endless variety of organisms and conditions. However, this vast amount of information needs to be extracted in a reasonable way and funneled into manageable and functionally meaningful patterns. Genes may be reasonably combined using knowledge about their interaction behaviour. On a proteomic level, biochemical research has elucidated an increasingly complete image of the metabolic architecture, especially for less complex organisms like the well studied bacterium Escherichia coli. Results We sought to discover central components of the metabolic network, regulated by the expression of associated genes under changing conditions. We mapped gene expression data from E. coli under aerobic and anaerobic conditions onto the enzymatic reaction nodes of its metabolic network. An adjacency matrix of the metabolites was created from this graph. A consecutive ones clustering method was used to obtain network clusters in the matrix. The wavelet method was applied on the adjacency matrices of these clusters to collect features for the classifier. With a feature extraction method the most discriminating features were selected. We yielded network sub-graphs from these top ranking features representing formate fermentation, in good agreement with the anaerobic response of hetero-fermentative bacteria. Furthermore, we found a switch in the starting point for NAD biosynthesis, and an adaptation of the l-aspartate metabolism, in accordance with its higher abundance under anaerobic conditions. Conclusion We developed and tested a novel method, based on a combination of rationally chosen machine learning methods, to analyse gene expression data on the basis of interaction data, using a metabolic network of enzymes. As a case study, we applied our method to E. coli under oxygen deprived conditions and extracted physiologically relevant patterns that represent an adaptation of the cells to changing environmental conditions. In general, our concept may be transferred to network analyses on biological interaction data, when data for two comparable states of the associated nodes are made available.


Background
Over the last 40 years, biochemical investigations have discovered an increasingly consistent image of cellular metabolism (see e.g. [1]). This is especially true for less complex organisms such as Escherichia coli [2]. However, this alone provides a rather static image of the cell and thus investigations have been performed to discover cellular adaptation programs in response to changing environments such as nutrient excess, starvation and other stresses [3]. These observations originally followed rather linear interaction and reaction cascades, e.g. by investigating single knock-outs and tediously tracking of transcripts for single genes, or compounds and proteins that may potentially be influenced (see e.g. [4]). However, the advent of DNA microarrays has allowed us to explore a major subset or all genes of an organism under a variety of conditions such as alternative treatments, mutants, developmental stages and time points. For example, the technique enables us to classify tumour samples [5], to define small sets of potential marker genes to distinguish leukemias [6], and to discover regulatory mechanisms [7,8]. E.g., without prior information, the structure and function of the network that regulates the SOS pathway in E. coli could be elucidated with transcription profiles [9]. Furthermore, physical and chemical interaction data of proteins have been integrated. Knowledge of protein-protein interaction from high-throughput techniques [10] was applied to analyse gene expression data and revealed novel regulatory circuits [11]. Moreover, interaction knowledge from the biochemical network has been used to support the clustering procedure for gene expression profiles of yeast [12,13].
In the work reported here, we sought to reveal sub-graphs of a biological interaction network that show substantial adaptations when cells transcriptionally respond to a changing environment or treatment. As a case study, we investigated the response of the hetero-fermentative bacterium E. coli in response to oxygen deprivation. The regulatory machinery can react on this environmental change in different ways. One basic response changes the catabolism of glucose, switching off or down-regulating the respiratory sub-graphs such as the glyoxylate cycle and switching on the fermentation and production of acid end products (see e.g. [4]). This is supported by several signalling concepts, e.g. by inducing inhibitors for glyoxylate cycle genes, down-regulating glyoxylate cycle genes or activating and up-regulating genes for the fermentation processes. Simple clustering of gene expression data on these metabolic networks can yield sub-graphs that are either stimulated or repressed as we showed previously for the tryptophan biosynthesis of tryptophan treated cells [14]. With this method we were able to find an expression pattern in the network of genes having the same response to environmental changes. We developed our method fur-ther by integrating a combination of well established machine learning techniques, which enable the discovery of more complex regulatory patterns. In so doing, we were able to reveal interesting switches that are posted at process bifurcations, in rather good agreement to the expected anaerobic response of hetero-fermentative bacteria.

Extracted discriminative patterns
The adjacency matrix of the metabolic network was clustered with a variety of penalty parameters (d = 0, -0.05,, -0.9, step = 0.05), obtaining the most suitable clusters with d = -0.1 (Figure 1). This yielded 973 (not necessarily disjoint) clusters of sizes between 2 and 46 reactions. The expression data of all 43 samples (21 aerobic and 22 anaerobic) from the study of Covert et al. [15] were mapped and features for each sample calculated by applying the Haar-wavelet transformations on gene expression patterns of the clusters. We yielded 160,264 features for every sample. After deleting features that consisted of zeros from each sample, 70,912 features remained. A modified t-test was performed [16] to reduce the remaining features and focus the classifier on the most relevant patterns. As a threshold, a false discovery rate of 2e-05 was chosen to further analyse the 9,996 most significant features. With these features, the SVM was trained and tested Cluster-matrix Figure 1 Cluster-matrix. The whole matrix was divided into nine parts. This is a visualisation of the first sector ranging from vertex 1 to 918. True positives and true negatives are coloured in cyan and dark blue, false positives and false negatives in yellow and red, respectively. by a ten-time's ten-fold cross-validation. A recursive feature elimination [17] was applied for each run, yielding 100 lists of the most discriminating features. These features were ranked according to their selection frequency ( Figure 2). 8,191 out of 9,996 features were selected at least once. To help us focus on the most relevant features, only features with a significant selection frequency were used (p-value ≤ 0.05, in comparison to a random selection, Bonferroni corrected for multiple testing [18]). This yielded 181 features. Network clusters that contained these features were extracted and are further referred to as "extracted sub-graphs". Extracted sub-graphs were listed in accordance to their selection frequency. All extracted sub-graphs are given in the supplementary material (see Additional file 2, Table S2). In the following, extracted sub-graphs that contained less than six nodes are not considered to focus on larger patterns. Doubles are considered once. The remaining first 10 extracted sub-graphs are listed in Table 1 and are described in detail in the following ( Figures 3,4,5,6). Reactions were regarded as up-regulated (green in figures) if the corresponding genes were significantly up-regulated under anaerobic conditions(pvalue ≤ 0.05 of a t-test), down-regulated if significantly down-regulated (red in figures), and not significantly differentially regulated otherwise (grey in figures, red/green frames indicate a non-significant tendency). Note, that not all reactions are shown in the figures (especially the non-significantly regulated reactions may not be shown).
The extracted sub-graphs 1, 2, 5 and 6 show the fermentation of formate. In the extracted sub-graph 1 (Figure 3), all edges were due to the metabolite formate, except for the edges coming from dihydroneopterin triphosphate 2'epimerizase and dihydroneopterin triphosphate pyrophosphohydrolase. Under anaerobic conditions pyruvate formate lyase was up-regulated to process pyruvate into formate (fermentation). To avoid additional production of formate, the other formate producing nodes in the subgraph were down-regulated. Formate degradation was supported by up-regulated formate hydrogen lyase, which degrades formate into CO2 and H2. Formate transport into the periplasm was facilitated by the up-regulated expression of the associated transporter gene. Degradation of the quite costly 10-formyl-THF into formate and CoA-transfer for formate production was down-regulated, as formate is abundant enough under anaerobic conditions. Similarily, the GTP cyclohydrolases were down-regulated to limit the biosynthesis of folate.
The extracted sub-graph 3 reveals a basic switching of the leucine transporters. The putative sodium/branched chain amino acid symporter, BrnQ, (see [19,20]) was up-regulated while the ABC-transporter was down-regulated. Both are responsible for leucine uptake. However, BrnQ requires a Na + gradient whereas the ABC-transporter is dependent on ATP which is limited under anaerobic conditions.
Extracted sub-graphs 4 and 10 ( Figure 4) contained reactions involved in anaerobic utilisation of aspartate. This makes sense when taking the support of glucose and ammonium from the medium into account, as in anaerobically grown E. coli the glyoxylate cycle is separated into an oxidative and a reductive branch terminating at oxoglutarate and succinyl-CoA. Oxoglutarate and succinyl-CoA have anabolic functions and are required as precursors for glutamate and other syntheses. Aspartate can be produced by aspartate transaminase from oxalacetate using glutamate which can incorporate ammonium from the ammonium rich M9-medium. Indeed, in yeast, it was shown that the aspartate concentration is roughly 100 times higher in the cells under anaerobic conditions (results of Villas-Boas, reported in [21]). The generated aspartate may facilitate the biosynthesis of further amino acids and other important compounds. The genes for the corresponding enzymes were up-regulated in a combined manner. The central role of aspartate was further reinforced by the up-regulation of aspartate transporters. The gene for pyrimidine biosynthesis was slightly but not significantly down-regulated (aspartate transcarbamoylase, p-value: 0.16). Note, that the synthesis of pyrimidine may not be Selection frequencies Figure 2 Selection frequencies. Ranked selection frequencies of the features which remained after the recursive feature elimination. The most selected feature was selected 80 times out of 100.   regulated on a transcriptional level. In E. coli the committed step for the pyrimidine biosynthesis is aspartate transcarbamoylase, at which ATP and CTP compete for the same site on the regulatory subunit. ATP is activating and CTP inhibiting. As ATP is a purine and CTP a pyrimidine, the ATP/CTP ratio reflects the balance between these types of nucleotides [1]. As energy is limited, the ATP concentration is low under anaerobic conditions, enforcing the inhibiting effect to produce pyrimidine and bringing CTP on an equivalent low level. A quite different regulatory behaviour can be seen regarding purine biosynthesis: SAICAR synthetase is the eighth step in this process. Its required substrate, CAIR, competes with the substrates ATP and aspartate. CAIR binds 200 times more tightly to the free enzyme than to the ternary enzyme [22]. This explains the up-regulation of SAICAR synthetase which we observed, giving CAIR a better chance to bind a free enzyme within the aspartate enriched cytoplasm under anaerobic conditions. Pyridoxal kinase-2 is needed for the biosynthesis of the co-enzyme pyridoxal 5' phosphate. It was down-regulated to save resources, whereas the perox-idases were up-regulated in accordance to safely remove H 2 O 2 .
The seventh extracted sub-graph ( Figure 5) shows a general down-regulation of lysine metabolism, such as biosynthesis, degradation, up-take, charging and modification of tRNAs. The sub-graph also reports its interface to the fructoselysine degradation pathway which, interestingly, was up-regulated. Note, that fructoselysine is a degradation product of Amadori compounds (glycolated proteins, see [23]) which degrade poorly under anaerobic conditions [24].
The eighth sub-graph shows elements of the link between energy storing molecules to glycolysis, which was up-regulated under anaerobic conditions. The degradation of malto-dextrin and maltose leads to the release of beta-Dglucose. Beta-D-glucose is converted by glycokinase into beta-D-glucose-phosphate, to be used in glycolysis. The degradation of beta-D-glucose to glucono-delta-lactone was reduced due to the impairment of the electron transfer chain under anaerobic conditions, which is required to further process the resulting ubiquinol. In order to save resources under anaerobic conditions, enzymes participating in the anabolism of galactose and the cata-and anabolism of trehalose were down-regulated. In addition, maltose transporter, maltose-acetyl-transferase and amylomaltase were down-regulated to react upon the exclusive external energy supply by glucose.
The ninth extracted sub-graph ( Figure 6) consisted of enzymes at the interface of the glycolysis and an NAD biosynthesis pathway. The higher expression of glycolytic enzymes may indicate an enforced glycolytic turnover of glucose as glycolysis becomes the major energy supply during oxygen deprivation. More interestingly, the glycolysis intermediate dihydroxy acetone phosphate is taken up by up-regulated quinolate synthetases which are the starting point of the NAD biosynthesis. Even though NAD may be more constitutively produced, this makes sense, as it could be shown that quinolate synthetases become inactive when exposed to oxygen [25] and NAD may be primarily produced via the tryptophan biosynthesis pathway under aerobic conditions.

Comparison to a standard feature extraction method
To compare our findings to a standard feature extraction method, we applied the established feature elimination method by Ruschhaupt et al. [17] to the gene expression levels for the corresponding reactions (without any network information). A ten-time's ten-fold cross-validation was performed on Support Vector Machines, the feature extraction method was applied and the selected features then ranked according to their selection frequency. Table  2 shows the results for the first 40 top ranking reactions.
First extracted sub-graph Figure 3 First extracted sub-graph. Green boxes indicate significant up-regulation (p-value ≤ 0.05) under anaerobic conditions. Red boxes indicate significant down-regulation and grey boxes non-significant differential regulation. Red/green frames of grey boxes indicate a non-significant tendency. Glucose is catabolised into pyruvate. Under anaerobic conditions, pyruvate is degraded to formic acid (formate), which is either expelled (via transporters), or further degraded into H 2 and CO 2 . The reactions for these processes were up-regulated whereas the biosynthesis and degradation of costly compounds were down-regulated (folate and 10-formyl-THF, respectively).  At the top of the table is a formate transporter, pyruvate formate lyase and the formate hydrogen lyase complex, with ranks 1, 2 and 4, respectively. This compares to the first extracted sub-graph (formate metabolism) we found using our method, which may be further extended by formate dehydrogenase (rank 11) and pyruvate formate lyase (ranks 17 and 18). Note that with exception of one reaction of extracted sub-graph 9 (triose phosphate isomerase, rank 21) no other reactions of our extracted sub-graphs could be found by this standard method when considering the first 40 top ranking reactions. This supports our concept of identifying complex expression patterns that may not be found in a common straightforward manner.

Comparison with the results of the original study
We took the raw gene expression data from Covert and his co-workers [15]. They characterised the regulatory network of E. coli with respect to the aerobic -anaerobic shift and compared the gene expression changes of these regulatory genes with the predictions of their former model and their new model. To compare their results with our results, we selected all genes from this regulatory network ( Fig. 2 in [15]) and mapped them on the reactions of the proteins they code for. Only genes that had received a corresponding reaction in at least one of our clusters were considered (see Additional file 1, Fourth and tenth extracted sub-graph. It shows the enhanced regulation of some reactions metabolising aspartate in accordance to a higher abundance of aspartate during oxygen deprivation (see text). Aspartate carbamoyl transferase was slightly, but not significantly down-regulated (p-value: 0.16). For box colours see legend of Figure 3.

Discriminative power of the expression data
To test the discriminative power of the expression data, the classification was conducted with the gene expression data alone. Using only the expression data, 42 of 43 samples were correctly classified. Note that we yielded the same classification performance with our method.

Discussion of the clustering algorithm
Clustering the network consisted of two steps. The computationally more demanding first step computed the optimal cluster matrix for a fixed permutation in linear time, with respect to the number of non-zero entries in the matrix. This exploited the symmetry and could therefore improve the running time by a factor of two. We defined a penalty parameter d to select the clustering stringency. This enabled us to adapt the algorithm to a large variety of network topologies. In the non-simultaneous case the consecutive ones property is regarded for rows only. Christof, Oswald and Reinelt [26] successfully used the results of Tucker [27] and Booth & Lueker [28] to develop a branch-and-cut algorithm for the non-simultaneous case to solve the physical mapping problem [26,29]. Alizadeh et al. [30] and Greenberg et al. [31] used Hamming distance TSP heuristics to solve the underlying consecutive ones problem approximately. Whether the Hamming distance TSP approach works also in the simultaneous case must be tested in the future. Note that optimising simultaneous consecutive ones matrices is substantially more difficult than tackling the physical mapping problem. Nevertheless, based on the PQ-Tree-algorithm we were able to implement a fast heuristics and yielded reasonable clustering results. Biological networks contain few nodes with high connectivity, so called "hubs" [32]. These are not easy to group as they may be included in several clusters. On our cluster-matrices we got off-diagonal entries that were not sorted into appropriate clusters (red dots in Figure 1). This problem has to be tackled, for example by testing ensemble methods.
Seventh extracted sub-graph

Conclusion
Our method facilitated the discovery of interesting and complex regulated sub-graphs by testing all possible patterns within the metabolic network and sorting out the patterns with the strongest differences between the conditions. It may suit for a variety of further biological interaction networks, such as signalling networks, e.g. when analysing discriminative regulations in cancers with different prognoses, and/or incorporating interaction data from modern high throughput methods, such as yeasttwo-hybrid, chip-on-chip or fluorescence based technologies.
In our case study, we found a strong differential expression pattern of the transcripts coding for formic acid processing enzymes at the interface of the aerobic and anaerobic glucose catabolism: the aerobic catabolism processes pyruvate further on the respiratory glyoxylate cycle, whereas an anaerobic processing uses pyruvate formate lyase to produce formic acid as a fermentative product to be further degraded or excreted. Pyruvate formate lyase may serve as a single switch. However, our study highlighted a concerted regulation reaction on oxygen deprivation. The bacteria adapted to this environmental change not only by degrading pyruvate into formate, but also by reducing formate production from e.g. 10-formyl-THF. Furthermore, formate removal was enhanced by upregulated genes for formate exocytosis and formate degra-dation. We revealed an adapted regulation for aspartate processing enzymes. Interestingly, coming from aspartate, the starting point for purine biosynthesis was up-regulated, whereas that of pyrimidine biosynthesis was not. Searching for an explanation, we identified recent articles and textbook entries which provide plausible reasoning for this situation (see Results and Discussion). Further switches were revealed, as e.g. the activation of the NAD biosynthesis pathway under oxygen deprivation.
Hence, we elucidated some interesting and relevant subgraphs of the metabolic network that showed necessary changes during the aerobic -anaerobic shift. But note, that such findings may not represent the entire regulatory change during such a shift of the metabolic network.

Establishing the network
Metabolic reactions were extracted from the EcoCyc database (Version 9, [33]). A graph was established by defining neighbours of metabolites. Two metabolites were neighbours if and only if an enzymatic reaction existed that needed one of the metabolites as input (needed substrate) and produced the other as output (product). Note, that in this representation, enzymes are edges and metabolites the nodes. This network was clustered to group enzymes into parts of the network with their major connections (the clustering algorithm is described below, see section "The clustering method"). The clustering algorithm produced a symmetrical sub-matrix of the cluster matrix for each cluster, whose rows and columns were the metabolites. The matrix contained a "1" entry at position (i, j) if an enzyme existed that combined metabolites of row i and column j. Otherwise a "0" entry was set ( Figure  7).

Mapping gene expression data onto the cluster-matrices
For our case study, we collected raw intensity values of gene expression data from the work of Covert et al. [15] which we downloaded from the ASAP database [34]. Covert et al. determined mRNA levels of all open reading frames by hybridisations on Affymetrix oligo microarrays. We normalised them with an established variance normalisation method [35] and selected the data for 43 hybridisations of the following samples: strain K-12 MG 1655, wild-type, ∆arcA, ∆appY, ∆fnr, ∆oxyR, ∆soxS single mutants and the ∆arcA∆fnr double mutant (for generation of the knockouts and growth conditions, see [36,37], respectively). The mutated genes are key transcriptional regulators of the oxygen response [15]. They effect a major portion of all genes in E. coli and therefore supported a variance stimulation of the respiratory and fermentative control of the investigated strain. All gene expression experiments were done in triplicate under aerobic and anaerobic conditions, respectively, except for anaerobic Ninth extracted sub-graph Figure 6 Ninth extracted sub-graph. Interface of the glycolysis (upregulated, yellow box) and an NAD biosynthesis pathway (see text). For box colours see legend of Figure 3. wild-type which was repeated four times. The gene expression data of each data-set was mapped onto the corresponding reactions of the transcribed proteins. Mean values were taken if a reaction was catalysed by a complex of proteins. The expression data of all samples was mapped onto each cluster-matrix, yielding 43 different patterns for each cluster.

Pattern discovery: defining the features with the Haar wavelet transform
We wanted to calculate a value for every possible expression pattern of neighbouring genes and groups of genes within a cluster that may show essential differences between samples of different conditions. Therefore, we performed a Haar-wavelet transform for each clustermatrix. The wavelet transformed expression values served as features for the classifier (classification method, see next section). This allowed the identification of regions with a varying pattern between aerobic and anaerobic conditions. The wavelet-transformation is described in the following. Each cluster-matrix was divided into 2 × 2 pixeled disjoint sub-sections (e.g. a cluster matrix of size 8 × 8 was divided into 16 sub-sections). Clusters with nonfitting sizes (e.g. 3 × 3, 5 × 5,) were extended with rows and columns of zeros to yield matrices that could be divided into 2 × 2 pixeled sub-sections. For each sub-section, all combinations of row-wise and column-wise mean and differences, respectively, were calculated. This yielded 4 combined values for each 2 × 2 pixeled sub-section: 1st: mean of the mean of the upper and mean of the lower row, 2nd: difference of the mean of the upper and the mean of the lower row, 3rd: mean of the difference of the upper and the difference of the lower row, and, 4th: difference of the difference of the upper and the difference of the lower row. All four combined values for each 2 × 2 pixeled sub-section were stored and applied as features for the classifier. This was done for all sub-sections of the matrix. All 1st combined values (mean of means) were taken for a new matrix and were again grouped into 2 × 2 fractions that were combined in the same manner, yielding again 4 new features for every fraction. This procedure was repeated until no further grouping was possible. Such a "Haar" wavelet transform can be regarded as a low pass filter when calculating the mean, and a high pass filter when calculating the difference between neighbouring value pairs. The transform applied a filter in horizontal and subsequently in vertical direction. The procedure consisted of repeatedly applying high and low pass filters on the image. Therefore, either high frequency or low frequency portions of the signal were calculated and stored, until the maximal possible compositions were obtained. This procedure was carried out for all clusters of every sample and the results of the transforms were stored as the corresponding features for every sample.

Extracting essential features and their sub-graphs with the classifier
The SAM method [16] as a modified t-test was performed to rank the features according to their p-values. Higher ranking features (low p-values) were selected focusing the classifier on the most relevant patterns (9,996 out of 70,912). For classification, we applied the Support Vector Machine implementation as provided by the R MCRestimate package [17]. To receive a suitable feature extraction result, a 10-fold cross validation was performed and repeated 10 times with different splittings of the data, respectively. A linear kernel was applied for the feature extraction as described elsewhere [17]. Parameter optimi-sation was performed for the regularisation term that defined the costs for false classifications (9 steps, range: 2 n , n = -4, -2,, 8,10). This optimisation was realised by an internal three-fold cross validation during every iteration.
To determine the most relevant features, a recursive feature elimination [17] was applied during the parameter optimisation procedure. This yielded a set of discriminating features for every run. These features were ranked due to their selection frequency of all 100 runs. Note, that high-ranking features yielded the corresponding subgraphs (cluster of the cluster matrix) of the reaction network that contained well discriminating patterns of the expression data. We defined a cut-off criterion for selecting only substantial features by comparing the selection frequency of each feature with random selections. We assumed a binomial distribution, neglecting the cases that the same feature may have been chosen twice in one run. The overall number of drawings was the sum of all selections (8,191 selections). The probability to draw the respective feature was the reciprocal value of the number of all features (1/9,996). The number of drawings for the respective feature was its selection frequency. As we calculated this for every feature, the resulting p-values where corrected for multiple testing by multiplying them with the number of all features (Bonferroni correction [18]).

The clustering method
The metabolic network was represented by an adjacency matrix: An entry at row i and column j was set to "1" if there existed a common reaction downstream of metabolite i and upstream of metabolite j or vice versa. Note, that for the pattern discovery method described above, this entry was the corresponding gene expression value of the reaction. The adjacency matrix consisted of 2,754 rows and columns and 2 × 17,233 non-zero entries (entries (i, j) and (j, i) equaled). Hence, non-zero entries were rare (≈ 0.45%). The matrix was transformed to obtain regions enriched with non-zero elements by the following clustering method.
Given the metabolic network as graph G(V,E) with node set V (metabolites) and edge set E (reactions), our goal was to identify clusters of G where each cluster was given by the node set of a highly connected sub-graph. Note, that we did not require the clusters to be mutually disjoint. The clustering algorithm based on the so-called weighted simultaneous consecutive ones problem .Clusters were represented by symmetric 0/1-matrices. Rows and columns of the matrix corresponded to the nodes of G. A "1" entry in position (i, j) indicated that there was at least one cluster containing both node i and node j. A "0" entry indicated that there was no cluster containing both nodes. The diagonal entries were fixed to "1" (Figure 7). We call such a matrix cluster-matrix. Using a suitable permutation to rearrange both the rows and the columns of the cluster-Simple example of a cluster sub-matrix Figure 7 Simple example of a cluster sub-matrix. The cluster is represented by its matrix (a) and its corresponding sub-graph (b). "1" entries are designated as yellow boxes, "0" entries as blue boxes. Note, that the main diagonal entries are set to "1". matrix, one can obtain a matrix with consecutive "1" entries in every row as well as in every column. Note, that a matrix has the simultaneous consecutive ones property (SCO) ,if such a rearrangement of rows and columns is possible. A characterisation of such matrices was given by Tucker [27] and there is a linear time algorithm for checking this property using the PQ-Tree algorithm introduced by Booth and Lueker [28]. This algorithm outputs a data structure from which all node permutations that establish the SCO property can be generated. The basic task was to convert the adjacency matrix (A) of G into a cluster-matrix X containing only "1" in the clusters. Altering an entry of the adjacency matrix ("0" to "1" flip) was allowed though penalised. The main part of this process was to search for simultaneous permutations (rows and columns) that led to a minimum number of "0" to "1" flips. Figure 8 shows an example. We parameterised the objective function using a negative parameter d for adjusting the ratio between rewarding an edge inside a cluster and penalising a "0" to "1" flip, i.e. for placing two nodes that were not connected inside the same cluster. Formally, given a symmetric adjacency matrix A n x n with a ij ∈ {0, 1} and a ii = 1 ∀ i, j = 1...n, we wanted to maximise the objective function where the coefficients c ij were defined by X = (x ij ) denoted the cluster-matrix of A to be optimised. As a starting point, X equaled A with all diagonal entries fixed to "1". The goal was to transform X by simultaneous column-and row-permutations yielding a matrix that consisted of quadratic sub-matrices with "1" entries and "0" entries else.
Note that, as we allowed missing connections inside a cluster, non-connected nodes could still enter the same cluster. The objective function was penalised by a negative value d for every c ij inside a cluster of X that was a "0" entry in A. This avoided clusters with too many non-existing connections in it. If the nodes i and j were not connected by an edge (i.e. a ij = 0) but assigned to the same cluster (i.e. x ij = 1), the negative parameter d reduced the objective function value c X . Note that, as the number of inequalities for describing the SCO grows exponentially with the input elements, it got computationally too hard to solve the integer program exactly for this study. Therefore, we designed a fast heuristics based on algorithms for the consecutive ones problem. Having as an input the adjacency matrix A of our graph G to obtain the clustering matrix X opt , the heuristics worked as follows: The choice of the loop parameters depended on the size of the input and was chosen as k = 250, l = 10 and m = 100. The two loops were independent of each other. The outer loop 5 restarted the main part of the heuristics (loop 5.2) for several different start permutations, always saving the best result found.